金贝散结颗粒制粒工艺研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

R283

基金项目:

广东省中医药局科研项目(20221200)


Research on Granulation Technology of Jinbei Sanjie Granules
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    目的:筛选金贝散结颗粒的颗粒成型工艺。方法:在单因素考察的前提下,用正交试验方法,以 清膏∶辅料、辅料A(可溶性淀粉)∶辅料B(糖粉)、乙醇浓度、乙醇用量(乙醇重量∶辅料重量) 为考察因 素,进行四因素三水平L9 (43) 正交试验,以成型率、休止角、堆密度为考察指标,采用多指标加权评分法初 步筛选最佳制粒工艺。结果:确定最优制粒工艺为清膏∶辅料=1∶3,可溶性淀粉∶糖粉=1∶1,95%乙醇用量 为辅料的5%。结论:实验优选的制粒工艺成型率高,颗粒均匀,流动性好,稳定性好。粒度、溶解性均符合 要求,优选工艺合理、可行。

    Abstract:

    Abstract: Objective: To screen the particle forming process of Jinbei Sanjie Granules. Methods: Under the premise of single factor investigation, orthogonal test was used, and paste to excipients, excipient A (soluble starch) to excipient B (powdered sugar), ethanol concentration and ethanol dosage (ethanol weight to excipient weight) were considered as factors. The four- factor and three- level L9(43) orthogonal test was carried out. The forming rate, angle of rest and bulk density were considered as indicators, and the optimal granulation process was initially screened by multi- index weighted scoring method. Results: The optimal granulation process was determined as paste to auxiliary material =1∶ 3, Soluble starch to powdered sugar = 1∶1,95% ethanol dosage was 5% of excipients. Conclusion:The optimized granulation process has high forming rate,uniform particles,good fluidity and good stability. The particle size and solubility meet the requirements,so the optimal process is reasonable and feasible.

    参考文献
    相似文献
    引证文献
引用本文

余利珊,袁伟彬,吴涵.金贝散结颗粒制粒工艺研究[J].新中医,2024,56(4):189-193

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-02-28
  • 出版日期: